ECO Charge FS3, Operator/Installer Manual

Page: 10 / 29

10. Operating Instructions
Operating Instructions
Set the rocker switch to START .
8
7
1
2
3
4
5 Connect the battery to the charger using the correct cable.
Check the voltage, amphr and battery type indicated on the
charger’s display matches the battery to be charged.
Plug the charger in and turn on the AC supply.
Set the rocker switch to STOP .
Check the battery leads are in good condition before proceeding.
The red CHARGING light will illuminate
to indicate charging has commenced.
When the green READY light illuminates, charging is complete.
9
Set the rocker switch to STOP and then
disconnect the battery from the charger.
6