ECO Charge BMM, Operator/Installer Manual

Page: 6 / 20

6
DC Supply & Voltage
Midpoint Sensor
The DC Supply wires are
terminated with ring terminals
for easy fastening to the
battery
with the supplied
screws. The positive (RED) and
negative (BLACK) wires should
be fastened to the top of their
respective
battery terminal
posts. The Midpoint Voltage
(WHITE)
wire should be
fastened to strapping or a
terminal as close as possible
to the voltage midpoint of
the battery. It is recommended
to
coat wire terminations
with corrosion inhibitor before
installation.
Temperature Sensor
The ideal location for the BMM
temperature sensor is between
the cells at the center of the
battery. Depending on the
battery type and construction,
this may not be practical. The
alternative location is cable tied
to the underside of a segment
of lead strapping. An additional
temperature sensor is built-in to
the BMM module.
Installation
- continued