ECO Charge BMM, Operator/Installer Manual

Page: 10 / 20

10
Charger Confi guration
Confi guration of your XHF Series charger for Automatic Profi le
Confi guration (APC) can be achieved by confi guration via the Charger
Interface Software.
• Connect your PC to the charger via USB and ensure the charger has AC
supply.
• Check that the Charger Interface is communicating with the charger by
following the Setup steps on page 8.
• From the Charger menu, enable the Confi guration tab, and ensure the
tab is visible.
• From the Confi guration Template drop-down list, choose the option
“ APC Enabled ”.
• Ensure the adjacent drop-down lists are appropriate for charger type
and AC supply.
• Click the Use Values button to populate the parameter fi elds below.
• Click Write Default Confi guration to program the charger with the
selected parameters.
• Chargers intended for high rate charging should have the additional
parameter “Use Fast Charge Profi le” checked, under the Controller
Settings tab.
To confi rm successful confi guration, the charger front display will read
“ APC Enabled ”.
Confi guration
- continued