ECO Charge BMM, Operator/Installer Manual

Page: 5 / 20

5
Installation
NOTE: Before attempting installation, please read through the complete
installation instructions. The battery to be fi tted should be disconnected from
any load prior to installation.
Communications and
Current Sensing Toroid
The Communications Toroid
requires the negative lead to
be removed from the battery
and placed through the toroid
and re-secured to the negative
battery terminal. Alignment of
the toroid should be made so
that the cable exits the toroid
away from the battery terminal.
Keep at least 8in (20cm)
clearance between the toroid
and the positive battery lead. A
half-sleeve on the toroid housing
is provided to secure the toroid
to the battery cable by cable tie.
Unit Location
The BMM module is designed
to sit directly on top of the
battery surface. For optimum
Bluetooth
®
range, locate the
module near any openings in
the battery enclosure. Cable ties
are supplied to secure the unit
to the battery straps as shown.