ECM NH3 5250, Instruction Manual, Page: 48 / 62

44
8. Initialize hardware. The hardware is currently stopped, as indicated by the red stop
sign icon next to the selected hardware. You must initialize it before you can use it to
collect data. Click on the Initialize Hardware button on the upper tool bar and wait
for the hardware to complete its initialization. Another window will pop up to
confirm the device to connect to. Click OK.
9. Open an Experiment Environment. Click on the Experiment Environment button
on the upper tool bar to open an Experiment Environment. The Experiment
Environment is where you can setup the monitoring of the CAN bus. By default, the
Experiment Environment will be blank. You must select the variables from the dbc
file that you wish to monitor. Click on the Select Variables icon in the left hand tool
bar of the Experiment Environment.