ENGLISH
Translation of the original German user manual
30
6.3 Cleaning of the burrs
•
It is very difficult to unscrew the burr bracket, due to the fine threads. There is a risk of
injury.
•
Please make sure that coffee grounds remain in the threads, since it will not be able to be
screwed back together if this is the case.
Close the bean hopper with the lid and grind the
remaining beans still in the hopper.
Unplug the grinder
and unscrew the safety screw
of the bean hopper.
Remove the bean hopper. Please note that the
hopper latch has to be closed.
Loosen the screws of the grinder dial with an
Allen key (2.5mm).
Remove the grinder dial.
Unscrew the bracket of the upper burr. Please
note that it may take some force to do so.
Clean the burrs and the threads with a brush. You
may use a vacuum cleaner as well.
