ENGLISH
Translation of the original German user manual
25
4.3.1 Machine in use with direct water connection
The water connecting hose is to be connected to the water supply adapter under the machine (image 1).
Always use the hose supplied with the machine
to connect the machine to the water supply system, even if
an old hose is already present.
When using the machine with direct water supply, the valve has to be turned towards water supply adapter
(image 1). The water supply adapter is located in the rear part of the bottom panel (image 1). Additionally,
place the switch behind the drip tray into
position “1” (image 2).
Please make sure that your water tap is always open during water-connection usage so that the machine
does not run out of water!
image 1
image 2
Valve in position for
operating machine with
direct water connection
(facing towards the rear of
the machine
Water supply adapter
Place switch into position “1”
for direct water connection
Important
•
Do not leave the machine switched on or unattended when not in use.
•
Make sure to close the shut off valve of the water connection and to switch off the
electric main switch or to disconnect the power plug when the machine is not in use
.
•
If you will not be using the machine for an extended period of time, we recommend
emptying the machine by letting the water run out via the brew group. To refill, proceed as
described in the initial start-up (section 5).
4.3.2 Machine in use with water tank
When using the machine with water tank, please turn the valve to the front side of the machine (image 3).
Additionally, place the
switch behind the drip tray into position “0” (image 4).
Image 3
Image 4
Valve in position for
operating machine with
water tank
(facing towards the front
side of the machine)
Water supply adapter
Place switch into position “0”
when operating machine with
water tank
Important
•
Please
make sure that only a service agent or similarly qualified person connects the
machine
to the water supply
and installs the pressure regulator and shut off valve.
•
To avoid calcification of the machine a water-softener is recommended.
•
The machine may only be descaled by your service agent or similarly qualified person
because a partial disassembly of the boiler and the tubing may be necessary to prevent
the system from being blocked by lime residues
. A late descaling can cause substantial
damage to the machine.
The residual water is disposed off periodically by emptying out the water drip tray.
