background image

ECLYPSE ELECTRIC KIDS’ BIKE MANUAL

13

12

3. ACCEPTABLE RIDING 
PRACTICES AND CONDITIONS 

WARNING: 

Always check and obey any local laws or regulations, which may affect the 

locations where the electric kids’ bike may be used. Keep safely away from cars and motor 
vehicle traffic at all times, and only use where allowed and with caution. Never ride your 
Eclypse electric kids’ bike on public streets, roads, highways, at night or when visibility is 
limited.

Do not activate the speed control on the hand grip unless you are on the electric kids’ bike 
and in a safe, outdoor environment suitable for riding. The maximum speed of the bike is 
limited by the selected power mode (See Throttle Operation section below). Avoid excessive 
speeds that can be associated with downhill rides. Maintain a grip on the handlebars with 
both hands at all times. Do not touch the brake or motor on your electric kids’ bike when in 
use or immediately after riding, as these parts can become very hot. Ride defensively. Watch 
out for potential obstacles that could catch your wheel or force you to swerve suddenly or 
lose control. Be careful to avoid pedestrians, skaters, skateboards, scooters, bikes, children 
or animals who may enter your path, and respect the rights and property of others. These 
electric kids’ bikes are intended for use on flat, dry surfaces, without loose debris, such as 
sand, leaves, rocks or gravel. Wet, slick, bumpy, uneven or rough surfaces may impair traction 
and contribute to possible accidents. Do not ride your electric kids’ bike through mud, over 
ice, through puddles, in wet or icy weather and never immerse or wash the electric kids’ bike 
with water, as the electrical and drive components could be damaged by water or create other 
possibly unsafe conditions. Never use near steps or swimming pools.

Avoid sharp bumps, drainage grates, and sudden surface changes. Do not attempt or do 
stunts or tricks on your electric kids’ bike. These electric kids’ bikes are not made to withstand 
abuse from misuse, such as jumping, curb grinding or any other type of stunts. Racing, stunt 
riding, or other maneuvers also enhance risk of loss of control, or may cause uncontrolled 
rider actions or reactions. Never allow more than one person at a time to ride the electric kids’ 
bike. Do not ride at night or when visibility is limited. Never use headphones, a cell phone, 
or text when riding. Never risk damaging surfaces, such as carpet or flooring, by use of an 
electric kids’ bike indoors. Never tow anything or anyone with or allow your Eclypse electric 
kids’ bike to be towed by any other person or vehicle, motorized or not.

Please ride Eclypse electric kids’ bike in a controlled environment and do not ride on the public 
streets, open roads and highways.

POWERED & ROTATING PARTS WARNING:

Never operate the electric kids’ bike without the side panels and chain guard properly installed. 
Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with 

any rotating or moving parts, wheels, or drive train components and chain while the motor is 
running or while the wheels and tires are rotating.

PROPER RIDING ATTIRE:

Always wear proper protective equipment, such as an approved and properly fitted safety 
helmet (with chin strap securely buckled), eye protection, athletic shoes (lace-up shoes 
with rubber soles) elbow pads and kneepads. Keep shoelaces tied and out of the way of the 
wheels, motor and drive system. Never ride barefooted or in sandals. Long-sleeved shirt, long 
pants, and gloves are recommended. Furthermore, a helmet may be required by local law or 
regulation in your area. Your child’s brain is their most valuable asset, MAKE THEM WEAR AN 
APPROVED, PROPERLY FITTED AND BUCKLED HELMET!

SAFELY APPROACHING OR RE-MOUNTING THE ECLYPSE 
ELECTRIC KIDS’ BIKE: 

During adult supervision always teach children to approach thEclypse electric kids’ bike with 
caution; before use, while standing back up if knocked over, or after a spill.

1.  Press power switch 3 second to turn electric kids’ bike off.
2.  Ensure all wheels/tires and drive train components have stopped rotating or 

moving.

3.  Inspect for any obvious damage.
4.  Perform a “Pre-Ride Inspection” (below)
5.  Have rider mount the Eclypse electric kids’ bike, gripping the handlebars with 

both hands, sitting on the saddle with both feet flat on the ground.

6.  Press power switch 3 second to turn electric kids’ bike on.
7.  Finally, carefully resume riding your Eclypse electric kids’ bike.

Acceptable Riding Practices

Summary of Contents for Astra
















Reviews: