Steering Remote Control
Importing steering remote data (U.S.A. only)
About the Steering Remote Control
The vehicle’s factory loaded steering remote becomes inoperable when the CD3100 is installed.
The ECLIPSE web site (E-iSERV) provides software that enables steering remote operation even
with the installation of the main unit. Import this software into your CD3100.
How to operate the Steering Remote Control
Download the Steering Remote setting file from the E-iSERV (web site) that suits with
your vehicle, and then write it to a CD-R.
ATTENTION
<When using a CD-R>
• The main unit can only import
fi
les located in the root directory of the CD-R.
File extension
XXXXXXX.ssw
Automatically generated filename
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* CD-ROMs written in MODE2_FORM2 cannot be read.
• The loading process may take for a certain time if the CD-R contains unrelated data in
addition to the steering remote customization
fi
les to be imported.
Load the saved data from the CD-R to the unit. For details of the operation, see
'Reading steering remote data (U.S.A. only)' in the Owner's Manual.
ATTENTION
• This function is available only for the vehicles that have steering remote controller with the
voltage detection type interface.
• For detail of the setting, please contact to dealer.
11
22
