Eclipse AVN2454, Reference Manual

Page: 54 / 90

54
3
Navigation
Route setting
5
After deciding on a destination, recommended routes from the
present location to the destination are searched for and displayed on
the screen.
Routes to the destination will be colored into the screen and the
required time and distance to the destination will be displayed. This is
called the “All Route Diagram”.
From the all route diagram, you can check the progress of your
journey, select a different route and add stops along the route.
Toll road distance display
Freeway distance display
Distance display
Required time display
Remaining distance
display
Used road overview
display
All toll road distances to the destination are displayed.
All freeway distances to the destination are displayed.
The distance to the destination is displayed (in case of
multiple stops, the last stop is displayed).
The required time and bearing to the destination is displayed.
The distance with the indicated route is displayed. In
case of multiple stops, every time this switch is
pressed, the required time and distance to each of
them respectively are displayed.
Icons for freeways, toll roads, ferry crossings and
restricted roads will be active up to the destination.
■ Displays
Set the desired route