Eclipse AVN2454, Reference Manual

Page: 24 / 90

3
Introduction
Display angle adjustment
4
The screen viewing angle can be adjusted to any of 6 stepped
positions when light from outside the vehicle makes viewing difficult.
Adjust the angle of the display
1
OPEN
Press .
2
TILT
Touch .
The display will tilt upwards by one
step (5˚). Each touch of the switch
tilts the panel by another step.
Pressing the switch when the
display is tilted to the 6th level (30˚)
will bring it back up to its original
position (0˚).
ATTENTION
• The display will open when pressing or touching or even
when tilted. When closed again, it will return to its tilted position.
• If the display is in an adjusted angle position when the vehicle ignition is turned off,
the display will automatically return to the original position (0
°
).
If the ignition switch is then turned to ACC or ON, the display will return to the
adjusted angle position.
Caution
• Be careful not to pinch your hands or other objects when adjusting the angle of the
display. This could cause an injury or damage to the display.
• Observe the following cautions when adjusting the angle of the display.
<Automatic transmission vehicle>
When setting the tilt position, choose an angle that does not interfere with
operation of the shift lever in the "P", "R" or "N" lever positions. (If there is
interference with the shift lever in operating positions, do not set a tilt position.)
<Manual transmission vehicle>
When setting the tilt position, choose an angle that does not interfere with
operation of the shift lever in the 1, 3, 5 or "R" lever positions. (If there is
interference, do not set a tilt position.)
OPEN DVD CD
24