MANUAL DE USUARIO
– PROCAM HD II
Página
12
de
44
INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US
Standard menu
ORL menu
5.1.3 USB port
Use USB port to connect the storage device. Pictures and videos will be recorded on the
device *
*Function available from HC120G2/1 R04 version of the console or later
5.1.4 TAKE A PICTURE FUNCTION
By pressing the take picture button on the front panel you can capture a picture of the
image on the screen. The picture is saved to the device connected to the USB port.*
*Functionality available from console version HC120G2 R04 or later. If you use previous versions
of the console, you can use the FREEZE IMAGE function detailed below:
FREEZE IMAGE FUNCTION
By pressing the corresponding button on the front panel, the image will get frozen till the
button is pressed again. *
5.1.5 RECORD VIDEO FUNCTION
By pressing the record video button on the front panel can start recording a video.
Pressing it again stops recording. The video is saved to the device connected to the USB
port. *
*Function available from HC120G2/1 R04 version of the console or later
5.1.6 ADVANCED MENU FUNCTION
This function is only for technical personnel.
Access and modifications of the predetermined settings might result in permanent
changes and image could be altered adversely.
Press the Advanced Menu Button to get into the advanced configuration. In this section, the
image and video settings can be defined.
*NOTE: From R04 version the Advanced Menu Button is located on the rear panel of the
console. In addition, using the Select Button you can configure the parameters
