USER MANUAL
– EVERLUX - MINI PRO
Page
4
of
13
INMANUUIN169 Rev.2019.04.01 / ENG
The EVERLUX and its foot switch are built on an aluminum housing that is resistant to
shock and corrosion. Is easy to clean and it does not produce adverse biological
reactions.
Do not use the device during thunderstorms.
After the use of the device, turn it off and disconnect the power cable.
In order to avoid Electrical shocks this system must be connected to a power grid with
proper ground connection. (No exceptions)
Do not connect the EVERLUX to other devices that do not comply with IEC 60601-1 and
IEC60601-2-18.
Do not connect the EVERLUX to non-compatible devices.
This system is not designed to be used in the presence of inflammable anesthetic gases
mixture with air, oxygen, nitrous oxide, or ambient with high oxygen content.
The device is provided with a connectable power cable that assures proper electrical
isolation on the grid.
In the case of electromagnetic interference between medical device and other electrical
device, we recommend to increase the distance between the systems in order to minimize
the interference effects.
Do not open the device. The diagnose, service and repairs must be performed by
ECLERIS, or a company authorized by ECLERIS. ECLERIS will not be liable for the
damage caused by repairs, or service performed by unauthorized personnel.
In case of any problem, the system must be laid a plane surface and power cable
disconnected.
The device must be used only by personnel informed of all this warnings.
Any use outside of the manufacturer specific intent use, will exclude ECLERIS of all
liability.
This user manual must be with the device for permanent review. If the system is sold or
donated, the user manual must be delivered with the device.
If as a consequence of:
Inadequate use of the equipment.
No use of this manual.
Poor care and maintenance of the equipment or.
Repair and manipulation by unauthorized personnel.
…any material or personal damage were caused to third parties, ECLERIS, the manufacturer and
the supplier of the equipment, shall not assume any responsibility for such damages.
Do not dispose the device, or any of the accessories with the domestic waste. Research
the local rules and laws for proper disposal. It is the user responsibility to deliver the
system to the proper location for disposal or recycle of electrical and electronic device or
contact the manufacturer or authorized representative to proceed on the elimination of
the system on a safe and ecological way.
3. INTRODUCTION
EVERLUX light source, based on the LED technology, has been designed to be used in medical
applications.
It has a LED (Light Emitting Diode) lighting module which produces the necessary light to obtain
video images. The cold, deep and white light of this equipment enhances the real brightness and
colors allowing its use for all types of procedures.
