Ecleree AC-6, User Manual, Page: 4 / 40

4
1. IMPORTANT REMARK
We thank you for trusting on us and choosing our AC-6 mixer. In order to get the most in operation
and efficiency from your mixing unit, it is VERY IMPORTANT for you - before you plug anything - to read
this manual very carefully and take seriously into account all considerations specified within it.
In order to guarantee the optimum operation of this unit, we strongly recommend that its
maintenance be carried out by our Authorised Technical Services.
1.1. Safety Precautions
This apparatus must be earthed through its mains cable.
Do not expose the unit to rain or water splashes, and do not place liquid containers or
incandescent objects like candles on top of the unit. Do not obstruct the ventilation shafts
with any kind of material.
Any change in the configuration of the unit must be carried out by a qualified technician. Should
any connection / disconnection task be done, always disconnect the unit from the mains supply.
There are no user serviceable parts inside the unit.
2. INTRODUCTION
With the AC-6, ECLER comes back to the historical AC series. In 1974, the AC-4 set the
precedents to what later on would become the club mixer with sliding faders.
During many years, the AC-4 has been praised as one of the best sounding mixers that ECLER
has ever launched during its long career. The AC-6 gathers the AC-4’s “essence” adding the latest
mixing technology advancements, turning this unit into an unrivalled mixer.
The AC-6 has 6 mixable channels, i.e. 6 channels with conventional sliding fader plus one special
channel for the effect return with rotary potentiometer, which can be used to input normal line-level signals
from any source. It features 20 stereo inputs: 4 PHONO, 6 CD (high line level for compact disc, DAT, MP3
players), 6 LINE, 1 AUX RETURN, 1 MIX; plus 2 more MICRO inputs for balanced microphones.
All channels have a lever switch input selector, independent gain control and 3-band tone
controls. The AC-6 incorporates an XFADER potentiometer, assignable to any input using a lever
switch.
All inputs are PFL-capable in order to visually (through the VU meters) and acoustically (through
headphones) monitor any signal connected to the inputs of the unit.
In the AC-6, we have cared specially about the roughness, long-time response and maximum
adaptability to the DJ needs, getting a total ease of operation.