7
6.
CAT CONNECTOR:
Connect it to the receiver input port using a CAT. 6 cable.
Only point-to-point connections are allowed.
7.
CONNECTION LED:
This LED indicates the state of the HDMI connection:
o
Light on: HDMI signal with HDCP.
o
Light flashing: HDMI signal without HDCP.
o
Light off: No HDMI signal audio output.
8.
DC 12V port:
Connect this port to the 12Vdc included power supply.
6.2. Receiver Front and Rear Panel
1.
HDMI OUT CONNECTOR:
Connect this output to the HDMI display.
2.
IR IN CONNECTOR:
Connect it to the included IR Receiver for extending an IR
signal from the display to the source.
3.
POWER LED:
This LED will be lit when the receiver is power supplied.
4.
CAT CONNECTOR:
Connect it to the transmitter input port using a CAT. 6 cable.
Only point to point connections are allowed.
5.
CONNECTION LED:
This LED indicates the state of the HDMI connection:
o
Light on: HDMI signal with HDCP.
o
Light flashing: HDMI signal without HDCP.
o
Light off: No HDMI signal audio output.
