6
PACKAGES CONTENT
•
1 x Transmitter Unit
•
1 x Receiver Unit
•
1 x 12VDC 1A International Power Supply (One PSU for both units)
•
1 x IR Blaster unit
•
1 x IR Receiver unit
PANELS DESCRIPTION
6.1. Transmitter Front and Rear Panel
1.
HDMI IN connector:
Connect this input to the HDMI source.
2.
EDID SWITCH:
The switch is used for selecting EDID. In the right position, the
extender will copy the HDMI loop out display EDID information to the source; In
the left position the extender will copy the receiver display EDID to the source.
3.
HDMI OUT CONNECTOR:
Connect this output to a local display or use it for daisy
chaining another VEO-XPS43 transmitter.
4.
IR OUT CONNECTOR:
Connect it to the included IR Blaster for extending an IR
signal from the display to the source.
5.
POWER LED:
This LED will be lit when the transmitter is power supplied.
