12
r a d i o - o n l i n e . m p 3
0 0 : 3 8 N E T
ePLAYER1 playing an Internet audio streaming
5.4. Setup Menu
Setup menu allows the adjustment of network parameters, events, time and date, etc.
Hold ENTER/MENU (6) key for a few seconds to access the setup menu. Navigation and parameters
adjustment is made in the same way as in the main menu (see section 5.1).
Following items can be found in the setup menu:
CHANNELS: stereo/mono configuration of the audio output.
WI-FI: Wi-Fi
interface’s configuration.
o
OFF: deactivates Wi-Fi interface.
o
ON: activates Wi-Fi interface. Press CONTROL & SELECT (2) digital encoder to show the
assigned IP address of the device. In MASTER mode this IP address is always 192.168.189.1
(see chapter 6 for details).
o
RESTORE DEFAULTS: restores Wi-Fi
interface’s defaults parameters.
ETHERNET: allows configuring the RJ45 Ethernet interface as DHCP or static (dynamic or static
addressing). Press CONTROL & SELECT (2) encoder to show the assigned IP address of the device
(DHCP).
DATE: shows the date with YEAR/MONTH/DAY format.
TIME: shows the time with HH:MM format.
VERSION: shows current firmware version of the device.
5.5. Lock Menu
Hold ESC (5) key for around 10 seconds to access the lock menu. Following options can be found in LOCK
MODE menu (navigation as in the other menus):
UNLOCK ALL: unlocks all keys in the frontal panel (free access to each parameter and control).
UNLOCK USER: locks configuration menu (administrator functions), allowing access to remaining
functionalities. A password will be required to protect the access to configuration functions. Rotate
CONTROL & SELECT (2) encoder to select the digit. Press NEXT (10) key to move to the next
character. Finally, press CONTROL & SELECT (2) encoder to confirm the password.
To unlock administrator functionalities, the password has to be entered after few seconds without
pressing any key. The device will lock administrator functionalities again, for precaution. It will be
necessary to access again the lock menu and select UNLOCK ALL to avoid locking the setup menu
after few seconds of user’s inactivity.
LOCK ALL: locks all front panel keys. To unlock them, procedure is the same as unlocking the setup
menu (UNLOCK ALL).
