7
7.
POSITIONING, FITTING AND START-UP
In the packing of eMOTU5OD, you will find all that is needed to complete installation of
the unit.
The following should be observed as general rules:
Always install on solid, firm surfaces.
For good sound reproduction, there should be no hindrance between the units and
the audience.
Adjust the levels of sound pressure to reproduction requirements. Despite its small
size, the eMOTUS5OD has a performance far higher than that of domestic
loudspeakers.
Procedure for installing
on a surface
:
1.
Make three 6 mm drill holes in the wall, lining them up with the position of the
holes in the bracket.
2.
Insert three 6 mm wall plugs in these holes.
3.
Fasten the safety line on the back of the bracket.
