ECLAIR Coutant, Operating Manual

Page: 15 / 32

Fitting the magazine to the camera
1. Remove the aperture plate cover by pressing button (C 25) and
ensure that the plate is clean.
2. Always check that the magazine loop is of the correct length (12
images) and evenly distributed in the magazine.
3. Attach the magazine to the camera by inserting the two lower guides
(G 65) in to the slots (C 28) of the camera (under the aperture plate).
Pivot the magazine on the location slots and ensure that the tongue
of the lock engages correctly in the magazine.
Always push over the safety catch (C 27) so that it engag.es in the top
of the magazine.
Removing the magazine
1. Push safety catch (C 27) to the right.
2; Hold the magazine in one hand at the same time press button (C 24)
with one finger of the other hand.
No te
When the shooting is terminated, replace the aperture plate cover and
the magazine nose protector.
SECTION X
15