background image

Specifications of Combi-Gateway

50

Version 1.6   04. November 2016

9.2

Mechanical data

9.3

Information on open source software

This product uses the following open source software under the mentioned licences:

Under GPL licence: 

Linux Kernel 3.5.4, busybox, canutils, coreutils, dbus, e2fsprogs, gettext, iproute2, libblockfile, libnl, readline,

udev, util-linux, freetype, u−boot

Under LGPL licence: 

eglibc, glib, Qt 4.8.4, libsocketcan, libmodbus, libquazip

Under BSD licence: 

lighttpd, pcre, pppd, libpcap

Other: 

zlib Copyright (C) 1995−2010 Jean−loup Gailly and Mark Adler, eventlog, figlet, libxml2, strace, dropbear

The Eckelmann AG make you an offer for a fee (for distribution, media, shipping and administration) to provide you source code on CD-

ROM. If disired please write an E-Mail at Eckelmann AG: [email protected]. This offer is available for a period of three (3)  years and

starts from the date of this present software distribution through the Eckelmann AG.

An example of the licences for GPL, LGPL and BSD can be called up via the product's user front end:

http://DNS_NAME_ODER_IP-ADRESSE/licences/index.html

You will find a translation of the GPL, LGPL licences under: 

http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html

All Rights reserved.

Every person who purchases a copy of this software and the accompanying documentation files (the ”Software”) is hereby permitted to use

the software free of charge and without restriction. This authorisation also applies, without restrictions, to the making of copies, combination,

modification, publishing, dissemination, issuing of a sub-licence and / or the sale of copies as well as the granting of this authorisation for the

exercise of these activities to people who have been provided with the software, as long as the following conditions are met:

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ‘AS IS’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSE­

QUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Summary of Contents for Combi



























































Reviews: