EN
24
Precaution
1.Remember to pay attention to the road while riding.
2.Don’t disassemble the main unit or its accessories.
3.Check relative position and gap of sensor, magnet and main unit periodically.
4. Don’t use thinner, alcohol or benzene to clean the main unit or accessories when they are dirty.
5. Don’t leave the main unit exposed to direct sunlight when not riding the bike.
6.Take care of you chest belt. Wash the chest belt by suds, and then flush out with water. Let it dry naturally. Avoid putting
the chest belt under the environment of high temperature or touching the corrosive material such strong acid or alkalis .
7.The physical condition of individual might effect the intensity of signal.
8.Avoid using the heart rate close to trolley car, tram stop, transformer, electric substation and high-tension distribution
line, etc. Because the radio signal will be affected under the environment with high voltage and strong magnetic field.
9.To ensure your safety, please use the Heart Rate Transmitter under a doctor or coach’s direction if you have one of the
following conditions:
a. Cardiopulmonary disease
b. Obesity.
c. No exercise for long period of time.
Irregular
display
LCD is
black
Display is
slow
Have you left main unit under direct sunlight
when not riding the bike for a long time ?
Is the temperature below 0°C (32°F) ?
Refer to the "Main unit data setting" and initiate the main
unit again.
Place main unit in the shade to return to normal state.
No adverse effect on data.
Unit will return to normal state when the temperature
rises.
