Bracket
Bracket
Power off
The display of General Mode looks different
in different phrases as shown below:
1. The main unit will automatically enter Sleep Mode in
15 minutes once it doesn't receive any signals from
the bike. Only current time is displayed when the
computer is in Sleep Mode (Power-Saving Mode.)
2. The computer will automatically start measuring the
speed, cadence by put it onto the bracket, or by
riding the bicycle if it was fit on the bracket already,
or by pressing the A (or B) button to wake it up.
3. When you wake up the computer and riding, it will
automatically scan for transmitters. S/R symbols will
flash till coded. (S: Speed, R: RPM)
*
If either of S/R symbol disappears, please hold C
button 3 seconds. It will again automatically scan
for transmitters.
4. When you put the computer onto the bracket, the
display will turn to instant icon, press A (or B) will
return to the function icon.
5. The computer will mark on the coded transmitter(s)
only. Non-coded transmitter(s) will result in
non-instant data display.
Note:
*
All the computer and transmitter in the package had been
paired in the factory before shipment.
You might to pair them again when: 1. no signal received,
2. buy or replace with new parts.
*
The computer can keep sensor pairing data in the memory
even you change the battery.
General Mode Display
During
Riding
SPEED+RPM LCD Display
1s
A
1s
A
24H
Before Installed
Onto The Bracket
Onto The
Bracket
12H
EN
10
