EchoStar HUGHES HT2000W User Manual Download Page 47

Page: 47 / 53

Appendix B ● Standards compliance

1041264-0001 Revision A

to which the receiver is connected.

•

Consult the dealer or an experienced radio TV technician for help.

Canada Class B warning

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Class II Radio Equipment (per R&TTE Directive 1999/5/EC)

Restrictions for European Union

Use of this product within the frequency band 29.25 GHz to 29.5 GHz requires

licensure within the targeted EU Member state prior to being put into service.
No restrictions within the band 29.5 GHz to 30.0 GHz for this product.

Identified European countries

This product may be operated in the following European countries:

Statement on compliance with the R&TTE Directive 1999/5/EC

Summary of Contents for HUGHES HT2000W






















































Search results

Summary of Contents for HUGHES HT2000W

Reviews:

Related manuals for HUGHES HT2000W

Brands by name

Popular brands

EchoStar HUGHES HT2000W, User Manual

Search results

Summary of Contents for HUGHES HT2000W

Reviews:

Related manuals for HUGHES HT2000W

Brands by name

Popular brands