12
b. From the Node’s
DPX
port, connect a coaxial connection to the
DPX receiver’s
To Node DPX
port.
c. Connect the Node to the DPX receiver and to the Home
Network. For additional information, see the
Product Launch Bulletin, Whole-Home HD DVR System
.
Connect TV and receiver.
Connect the receiver(s) to the TV(s) and power on the receiver(s)
and the TV(s). If a Receiver Setup Wizard displays, follow the on-screen prompts for this Wizard
to program the remote to the receiver, download software, and run Check Switch. Proceed to
step 8 after the Receiver Setup Wizard is complete.
Note
: The Download Software step of the Receiver Setup Wizard fails to proceed if the reflector
is not pointed correctly. If you see a pop-up instructing you to make sure that all cables leading to
the receiver are connected securely and correctly, verify your reflector is pointed correctly before
selecting
Continue
on this screen.
If a Receiver Setup Wizard does not appear, display the
Point Dish
screen (if not shown, for most
receivers, press
MENU-1-1
if in Factory software or
MENU-6-1-1
if in Production software on
the remote control) and continue to step 10.
Follow instructions provided in the Installation Wizard or Run Check Switch.
If
the Receiver Setup Wizard appears, follow the instructions provided and continue with step 13;
otherwise, from the
Point Dish
screen, run
Check Switch
. When the Check Switch procedure
finishes, you should see an
Installation Summary
screen similar to the ones shown in Figures
11, 12, 13, or 14. Make sure the summary screen shows reception from the 110°W, 118.7°W, and
119°W (and129°W for DISH 1000+) satellites on all available satellite tuners. The Installation
Summary screen only displays if you have run Check Switch.
9.
10.
MMTTVV-FMYYXXXXX
TO
CLIEN
TT
O CLIENT
EchoStar Technologies L.L.C.
Grounding wire size: Copper wire-8-14 AWG
Copper coated steel wire-17 AWG
T
O
L
N
B
F
S
DUO NODE
185836
TO
HOS
T
10.5-28V
TO
HOS
T
10.5-28V
To
LNBF
To Home
Network
To DPX
Receiver
To DPX
Receiver
Figure 11. DISH 500+
Installation Summary
Figure 12. DISH 1000+
Installation Summary
Figure 13. DISH 500+ with DPP
500+ LNBF Installation Summary
Figure 14. DISH 1000+ with DPP
1000+ LNBF Installation Summary