8
Installation Guide
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - [email protected] (US)
email - [email protected] (Europe)
Operation
Upon first powering the system it will perform a self check of all sensors.
If any sensors are faulty then the display will flash to show which sensor is
malfunctioning. Each set of 3 LEDs correspond to one sensor so if any group of 3
flashes it means that sensor is faulty. It will also signify whether this is front or rear
by use of the arrows on the display.
Please see the drawing below for fault detection indicators.
Sensor A Fault
Front Fault
Rear Fault
Sensor B Fault
Sensor C Fault Sensor D Fault
Rear Application
For rear applications,
SSM-DIS or SSM-RBP
can be used.
When reverse is engaged, the system will beep once to notify the driver it is on and
working. When an object is within range, the driver will be alerted via audible and/or
visual alert (if using the display).
SSM-RBP / SSM-DIS
Parking Sensor System
with Buzzer or Display
