3
email - [email protected] (US)
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - [email protected] (Europe)
Installation Guide
Fitting Instructions
PMON-43
4.3” Windshield Mount
Dual Input Monitor
Operating Instructions
Choose a mounting location on the windshield that will not obscure the driver’s
view. Please ensure that the unit is not mounted in a location that will obstruct the
operation of any airbags.
Once the unit is in place, run the connections cable to behind the dash where the
connections are to be made as shown in the wiring diagram section of this manual.
To turn on the unit the vehicle ignition should be active.
The monitor will only turn on when there is a video signal present.
Press the CAM SEL button to turn the screen on. You can also use this button to
switch between the two input signals.
Pressing the MENU button will allow you to adjust the various menu settings
available.
When a 12V input is detected on the green wire the unit will automatically switch
to Video1. If the unit is currently turned off when this trigger is detected it will
automatically turn on and switch to Video 1.
