14
Installation Guide
14
tel - 1-866-766-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
Routing the Camera Cables (continued)
FCTP-GM2403
Trailering Camera System
Step 20:
Secure the camera extension cable to the factory door
harness using the supplied zip ties. The cable will follow the
path outlined in yellow when it is secured to the factory wiring
harness. This will ensure that the cable is in an unobstructed
path into the vehicle through the door boot.
The camera cables must be run with and secured to the
factory wiring. Failure to do this WILL result in damage to
the camera extension cables.
NOTE
Step 21:
With the camera extension harness
now routed and secured to the factory
wiring, install the connector housing on
the bare connector end of the extension
harness. First, slide the pink housing
onto the connector. Then, slide the black
retention clip onto the pink housing
locking the connector in place.
Step 22:
Re-connect the mirror harnesses to the mirror and push in
the locking tabs. The driver’s side will only have the main
mirror connector.
