Echolite HDC-2210, User Manual

Page: 22 / 23

19
If you experience problems with this receiver or its installation, in the first instance please read carefully the
relevant sections of this User Manual and this Troubleshooting section.
Problem Possible cause What to do
Display on front panel not lit Main lead unplugged
Check mains lead
Main fuse blown Check fuse
No signal found
Aerial is disconnected
Aerial is damaged/misaligned
Check aerial lead
Check aerial
Out of digital signal area Check with dealer
No picture or sound
Program not broadcasting now
Retune to another
channel
Mosaic blocks in picture or
picture freezes
Aerial may not be compatible Check aerial
Scrambled channel
message
Channel is scrambled
Select an alternative
channel
Forgotten channel lock code Use the override code
No response to remote
control
Receiver off
Plug in and turn on
receiver
Handset not aimed correctly
Aim handset at front
panel
Front panel obstructed Check for obstructions
Remote control batteries are
inserted incorrectly
Check batteries
direction
Handset batteries exhausted
Replace remote
control batteries
After moving the receiver to
another room, find can’t
receive the digital reception
The aerial feed may come
through a distribution system
which may reduce the digital
signal now received by the
receiver
Try a direct feed from
the antenna
Warning: If this doesn’t work, contact a qualified repair technician, never attempt to repair the
receiver yourself.
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Troubleshooting