16
Menu Operation
3. System
Select the left [System] item by the ▲/▼ Button to config the
machine. Press OK to set what you want. Press EXIT button to exit
the Menu.
3.1 Parental Guidance
To set the rating level for viewer.
The menu is asked to input the pin , the default is “000000”.
[G] : General guidance [PG] : Parental guidance
[A]: Adult [X]: Erotic
3.2 Set Password
To change the password in the machine.
The default old password is “000000”.
3.3 Av Settings
3.3.1 Aspect ratio
To set the image display aspect ratio to 16:9 widescreen/4:3 letter
box/4:3 full/4:3 pan scan/auto
3.3.2 Resolution
To set the video resolution to 576i/576p/20p/1080i.
3.3.3 TV Format
To set the tv format to PAL, NTSC.
3.3.4 Video Output
To set the Scart output to CVBS, RGB mode.
3.3.5 Digital Audio
To set the digital audio output mode to PCM/RAW.
3.4 OSD Settings
To set the OSD Language to what you want.
3.5 OTA Update
Set OFF, Time Update, Manual Update.
3.6 Time settings
3.6.1 Daylight saving time
To set the daylight saving time in your country/region.
3.6.2 Timezone
To set the timezone in your country/region.
3.7 Restore Factory Default
To reset your machine to the default factory settings.
The menu is asked to input the pin, the default is “000000”.
NOTE: This option will delete all preset channels.
Menu Operation
4.4 PVR Configure
IMPORTANT: This menu will be only available when it is connected to an external Hard Disk
USB 2.0 properly formatted (FAT 32) as well as detected by the receiver. Always plug the exter-
nal hard disk before turning on the receiver
4.4.1 To Record Program
Note:
To record program, please connect the Hard Disk USB 2.0 with the receiver via the
USB front first.
When you need to record the program that you are currently watching, you can press the
REC red button on the remote control, and then a record time setting will appear on the
top of screen.
To stop recording, press the Yellow button then a prompt will be showed to ask you to stop
recording or not.
4.4.2 To Play or View Recorded
Program
All the recorded programs can be viewed and browsed under the
USB
menu.
Play the program
After accessing to USB menu, press the◄/►buttons to select
the Recorded program save item. Press OK button to enter
the Recorded program save item.
Press the ▲/▼ buttons to select the PVR List menu, then
press OK button to play the recorded program. For full screen
viewing, you can press the Red button again.
While the recording is playing ,a prompt will be displayed see
the third screen down on the right.To return to the PVR
Configure menu,select YES and press OK TO CONFIRM.
Press the RECALL button return to upper folder level.
While in the USB and Recorded program save item, menus
the following key actions are available:
Select: Press OK button to enter the selected menu.
UP FOLDER: Press to return to the previous menu.
Preview: Press to Red button enter fullscreen mode.
DEL: Press to Yellow button delete the selected file.
Remane: Press to Green button Remane the selected file.
Summary of Contents for HDC-2210
Page 2: ...www echolite com ...
Page 7: ...4 Remote control Remote key functions ...
Page 23: ...www echolite com ...