EchoLife ET655 IP Phone User Manual
4 Configuring the ET655
20
Field
Description
IP Address
The ET655 operates in two modes:
DHCP/PPPoE Mode:
All the field values for the static IP mode are not available
even though they are stored in the Flash memory. The
ET655 acquires its IP address from the first DHCP server
that the ET655 detects on its LAN. To use the PPPoE
feature, set the PPPoE account. The ET655 establishes a
PPPoE session if any of the PPPoE fields are set.
Host Name and Domain Name: The special DHCP options
that are added to the DHCP Discover and DHCP Request
after configuration.
Preferred DNS: The ET655 uses the DNS server if
Preferred DNS
is configured
Static IP
Mode: Configure all of the following fields:
IP
address
,
Subnet Mask
,
Gateway
,
Default Router IP
address
,
DNS Server 1
(primary), and
DNS Server 2
(secondary). The fields are set to
0
by default except that the
IP address is set to
192.168.0.160
by default.
802.1X mode
This parameter is set to perform the 802.1X authentication
when the IP phone is connected to a switch. You can click
Disable
to disable the authentication function, and click
EAP-MD5
to perform the registration authentication.
Identify
ID used during the 802.1x authentication
MD5 Password
MD5 password used during the 802.1X authentication
Iine Keys (1-4)
This parameter is set for specifying function modes of line keys.
By default, the value of
Key Mode
is
Line
, which is used by
common lines. If the value of
Key Mode
is
Shared Line
, it
indicates that the BroadSoft SCA functions are enabled and that
accounts scattered in various areas can share the line.
Multi-Purpose
Keys
The optional values are
Speed Dial
,
Busy Lamp Field(BLF)
,
Presence Watacher
,
eventlist BLF
,
Speed Dail via active
account
, and
Dial DTMF
.
Each key corresponds to an account, that is, a user number is set
for each key.