Echoflex Installation Guide
Temperature Sensor
Installation
Use hand tools when installing. Over-torquing with a power tool can
damage the sensor. The sensor’s removable back plate can be mounted
on most surfaces.
Note:
Consider linking the RTS while you have access and before
replacing the cover. See
Link to a Controller on page 5
.
Three different mounting options are available:
Test
button
•
Flush-mounted to a firm surface with screws and
wall anchors (not provided).
•
Using double-sided tape or Velcro (not
provided).
•
Over a standard, Class 2 low-voltage electrical
box. Keyholes in the back plate mate with
standard screw patterns.
1. Insert a flatblade screwdriver into the slot on
the key tab to separate the back plate from
the sensor.
2. Mount the back plate with the plastic key on
the bottom.
3. Align the sensor over the back plate and press
the lower edge until it clicks in place.
4. Test for adequate light levels. See
.
Note:
The RTS can operate with low light
exposure, but for best results, it should be
mounted where it receives four hours of
natural or artificial light daily.
Temperature Sensor
Page 3 of 8
Echoflex
