Echoflex Installation Guide
Vacancy Sensor
Power Up
All EchoConnect terminations in the system must be made before applying
power to the system and sensor. When the sensor is powered up, the PIR LED
illuminates for one minute for calibration and warm-up. The PIR detection
features of the sensor will automatically adjust the sensitivity threshold to
eliminate nuisance tripping. During this time configuration is not allowed
and no events are triggered.
Configuration
Basic
When the sensor is in Basic configuration mode (DIP switch 2 set to Off), the
sensor will activate a Space Off command when vacancy is detected.
Custom
When functionality other than Space Off is required, place the sensor in
Custom configuration mode (DIP switch 2 set to On). Customization of the
sensor and all actions are configured using the ElahoAccess App.
For more detailed information about custom configuration options available
using ElahoAccess, see the ElahoAccess App integrated help system.
Vacancy Sensor
Page 9 of 12
Echoflex
