ENGLISH
PAS PRO-THATCH ATTACHMENT
Misuse, improper assembly, or use of unapproved
attachments, can result in serious injury, engine failure,
and voiding of warranty. Use only attachments approved
for use on Pro Attachment Series models. Contact with
moving work attachments can cause entanglement and
serious injury. Keep clear of moving work attachment.
• ALWAYS
check Pro-Thatch tines for damage and
secure attachment before using unit. Replace tines if
damaged or missing.
• NEVER
use ProThatch without dethatcher guard in
place. Operation without a guard exposes operator to
flying debris and rotating steel tines.
• ALWAYS
install J-Handle before using unit, and
adjust position as needed to accommodate operator.
J-Handle provides best control and comfort when
operating unit.
• NEVER
replace tines with engine running. Stop engine and disconnect
spark plug lead. Wear work gloves when replacing or handling tines.
PAS POWER EDGER ATTACHMENT
Misuse, improper assembly, or use of unapproved
attachments, can result in serious injury, engine failure, and
voiding of warranty. Use only attachments approved for use
on Pro Attachment Series models. Contact with moving
cutting or work attachments can cause entanglement and
serious injury. Keep clear of moving work attachment.
• ALWAYS
check edging area for hidden objects, and
remove all dangerous debris.
• ALWAYS
stay clear of spinning edger blade.
• NEVER
operate with unit on left side of operator.
Use only on right side of body to keep operator out
of edger debris path.
• NEVER
use edger in gravel, rocky soil, or in
landscape beds with decorative rock ground cover.
• ALWAYS
use only approved edger blades.
• NEVER
use edger blades on any trimmer or brush
cutter.
• NEVER
operate edger attachment unless all edger
blade hardware has been properly installed.
• ALWAYS
use a new split pin each time blade is installed or replaced.
• NEVER
operate edger with damaged or missing debris shield.
Position Edger
on right side of
operator only
Pro-Thatch
Attachment
44
OPERATION