ENGLISH
WARNING
Move STOP switch to STOP position and
disconnect spark plug lead at spark plug
before assembling unit. Do not connect spark
plug lead to spark plug until unit is properly
assembled, checked, and ready for use.
ALWAYS
wear eye protection that meets
current ANSI Z87.1 requirements. Operators
that wear prescription glasses must wear
appropriate protective eyewear over glasses.
For additional safety, a full-face shield may
be worn over the safety eyewear to provide
complete face protection.
If parts are missing, or if you have a problem
installing parts, contact your Dealer for
assistance or call Consumer Product Support.
DANGER
Metal grass, weed, brush, and clearing blade edges
are extremely sharp. Accidental hand or body contact
with blade edges can result in severe cuts, even if the
engine is off and blades are not moving. Always wear
sturdy work gloves when handling blades. Do not
allow blades to contact any part of your body. Work
gloves do not provide protection from contact with
moving blades. Always keeps hands and body away
from moving blades.
NEVER
fuel, start, or operate your unit unless it is
fully assembled, all shields and required guards
are in place, and the throttle lock-out lever and
trigger are working properly.
Spark
Plug
Spark
Plug
Wire
12
ASSEMBLY
