Echo X7522340000 Safety Manual Download

Page: 1 / 56

ENGLISH

SAFETY MANUAL

For Grass Trimmer, Brushcutter and Edger

DANGER

Misuse may result in serious or fatal injuries. You

must read, understand, and follow these safety

instructions, and the instructions in the Opera-

tor’s Manual, before operating a Model GT Grass

Trimmer, SRM Trimmer-Brushcutter, PAS Pro-At-

tachment Series Powerhead, SB Split-Boom Trim-

mer-Brushcutter, or PE Power Edger.
If you operate a model SB Split-Boom or PAS Pro

Attachment Series multi-attachment unit, you must

also read, understand, and follow the instructions

in your PAS Attachment Operator’s Manual.

Metal blades are very sharp and can cause severe in-

juries, even if engine is off and blades are not moving.

Avoid contact with blades. Wear gloves to protect hands.

X7522340000

2/16

Summary of Contents for X7522340000

























































Search results

Summary of Contents for X7522340000

Reviews:

Related manuals for X7522340000

Brands by name

Popular brands

Echo X7522340000, Safety Manual

Search results

Summary of Contents for X7522340000

Reviews:

Related manuals for X7522340000

Brands by name

Popular brands