Echo SRM-4300, Operator'S Manual

Page: 21 / 24

21 SRM-4300
Storage
Long term storage (over 30 days)
WARNING
Do not store in an enclosure where fuel fumes may accumulate or reach an
open fl ame or spark.
NOTE
For future reference, you should keep this Operator’s Manual.
Do not store your unit for a prolonged period of time (30 days or longer) without
performing protective storage maintenance which includes the following:
1. Drain the fuel tank completely, start the engine and run it at idle speed until it
comes to a natural stop.
2. Always store fuel in approved container.
3. Place the ignition switch in the “STOP” position.
4. Remove accumulation of grease, oil, dirt and debris from exterior of unit.
5. Perform all periodic lubrication and services that are required.
6. Tighten all the screws, bolts and nuts.
7. Remove the spark plug and pour 10 mL of fresh, clean, two-stroke engine oil into
the cylinder through the spark plug hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2 or 3 times to distribute the oil inside the
cylinder.
C. Observe the piston location through the spark plug hole.
Pull the recoil starter handle slowly until the piston reaches the top of its travel
and leave it there.
8. Install the spark plug (do not connect spark plug cap).
9. Once the unit is suffi ciently cool and dry, fi t the blade cover onto the trimmer blade
and wrap the engine section in a plastic bag or other covering before putting them
in storage.
10. Store unit in a dry, dust free place, out of the reach of children and other
unauthorized persons.
Disposal procedure
• Dispose of waste oil in accordance with local regulations.
• Major plastic parts making up the product have codes showing their materials.
The codes refer to the following materials; dispose of those plastic parts in
accordance with local regulations.
• Please contact your ECHO dealer in case you do not know how you should dispose
of waste oil / plastic parts.
Spark plug cap
Ignition switch
Mark Material
>PA6-GF< Nylon 6 - Glass fi bre
>PP-GF< Polypropylene - Glass fi bre
>PE-HD< Polyethylene