Echo SRM-261, Operator'S Manual

Page: 11 / 32

G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERATOR
'
S
M
ANUAL
11
PLASTIC SHIELD INSTALLATION
(for Nylon Line Operation Only)
Tools Required: Screwdriver.
Parts Required: Plastic Shield, Shield Plate, three (3) 5mm x 15mm
screws.
NOTE
For added comfort, harness kit P/N 99944200200 may be installed for
use with line head and plastic shield. Follow installation instructions
included with harness kit.
1. Remove plastic threaded shaft sleeve and adapter plate (A) from
PTO shaft.
2. Place the shield on the bottom of the bearing housing flange.
3. Place shield plate (B) on shield, align holes. Install three (3) screws
from bottom through plate and shield into gear case.
4. Assemble adapter plate (A) onto PTO shaft.
NYLON LINE HEAD INSTALLATION
Tools Required: Head Locking Tool,
Parts Required: Nylon Line Head.
1. Be sure adapter plate (A) remains on PTO shaft.
2. Align locking hole in upper plate with notch in edge of gear
housing and insert head locking tool (C).
3. Thread line head onto shaft by turning it counter clockwise until
head is tight against adapter plate (A).
FRONT HANDLE INSTALLATION
Tools Required: Screwdriver.
Parts Required: Front Handle Assembly
1. Position front handle for comfortable operation and secure screws.
A
B
C