background image

G

RASS

 T

RIMMER

/B

RUSH

 C

UTTER

O

PERATOR

'

S

 M

ANUAL

11

Choosing the Correct Blade

WARNING  

  DANGER

The type of Blade used MUST be matched to the type and size of material cut.  An improper or dull blade can cause
serious personal injury.  Blades MUST be sharp.  Dull blades increase the chance of kick out and injury to yourself
and bystanders.

O

PERATION

OPERATION

 

WITH

 

BLADES

Preparing the Trimmer/Brush Cutter for Blade Use

WARNING  

  DANGER

Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, barrier bar or U-
handle, and harness can result in serious personal injury. Follow installation instructions included in optional kits.

Grass/Weed Blades Require:

Install Blade Conversion Kit,  Includes metal shield (A),
barrier bar (B), and shoulder harness (C).

Brush/Clearing Blades Require:

Install U-Handle / Blade Conversion Kit, Includes
metal shield (A), shoulder harness with hip pad (C),
and U-Handles (D).

B

A

A

C

C

D

NOTE
The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLE and should not
be gripped when using or carrying the unit.

Summary of Contents for SRM-260 - 12-06





























Reviews: