manualshive.com logo in svg

Echo SRM-225, Operator'S Manual, Page: 25 / 52

Share
Download
Echo SRM-225 Operator'S Manual Download Page 25

X7722279402

25

© 2/2016 ECHO Inc.

SRM-225

OPERATION

Spilled fuel is a leading cause of hydrocarbon 
emissions. Some states may require the use of 
automatic fuel shut-off containers to reduce fuel 
spillage. 

After use

• DO NOT store a unit with fuel in its tank. Leaks can occur. 

Return unused fuel to an approved fuel storage container.

Storage

 - Fuel storage laws vary by locality. Contact your local government for 

the laws affecting your area. As a precaution, store fuel in an approved, airtight 
container. Store in a well-ventilated, unoccupied building, away from sparks and 
flames.

Stored fuel ages. Do not mix more fuel than you expect to use in thirty 
(30) days, ninety (90) days when a fuel stabilizer is added.

Stored two-stroke fuel may separate. ALWAYS shake fuel container 
thoroughly before each use.

Starting Cold Engine

The attachment will operate immediately when the engine starts, 
and could result in possible serious injury.  Keep movable parts of 
the attachment away from objects that could become entangled or 
thrown, and surfaces that could cause loss of control.

1.

Stop Switch

Move stop switch button (A) 
forward, away from the STOP 
position.

A

Summary of Contents for SRM-225





















































Reviews:

No comments