FUEL SYSTEM
CSG-7410ES
EC741S
34
L
R
S
T
W
R
K
R
X
4-13 Installing carburetor, fuel line and tank vent (Continued)
12. Connect pressure line (L) to joint of carburetor
elbow (R).
13. Place intake gasket (S) on carburetor elbow (R)
as shown.
14. Secure carburetor elbow (R), intake gasket (S)
and carburetor (K) with 2 bolts (T), 2 spring wash-
ers (U), 2 washers (V) and pre-coated bolt (W) as
shown.
NOTE:
If the coat is peeled off, replace new one or
apply ThreeBond #1344 or equivalent. If old thread
locking sealant is left in threads, correct torque
may not be secured. In case old thread locking
sealant is left, remove it.
15. Install seal (X) to carburetor elbow (R).
K
S
R
T
U
V
W
