![background image](http://html.mh-extra.com/html/echo/sc-2013/sc-2013_operators-manual_532441009.webp)
4
3 INCH CHIPPER/SHREDDER
SAFETY
1.6 SAFETY DECALS
See Section 1.7 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals.
Do not operate machine without shields in place.
)DLOXUHWRGRVRPD\FDXVHVHULRXVLQMXU\RUGHDWK
Do not insert branches larger than
3/4 inch into shredder or machine
damage may occur.
Read and understand your owners manual before operating. If owners
manual was not included or you have any questions, please call 1-800-
432-ECHO(3246).
Do not operate this equipment
in the vicinity of bystanders. Do
not allow children to operate this
equipment. Obtain and wear safety
glasses and use hearing protection
at all times when operating this
machine. Before inspecting or
servicing any part of this machine,
VKXW Rႇ SRZHU VRXUFH GLVFRQQHFW
spark plug wire from spark plug and
make sure all moving parts have
come to a complete stop. Always
stand clear of discharge area when
operating this machine. Keep face
and body away from feed and
discharge openings. When feeding
shreddable material into chipper,
do not allow metal, rocks, bottles,
cans or any other foreign material
to be fed into chipper or shredder.
Before inspecting or servicing any
SDUWRIWKLVPDFKLQHVKXWRႇSRZHU
source, disconnect spark plug wire
from spark plug and make sure
all moving parts have come to a
complete stop.
Check blade bolts for proper torque
after every 8 hours of operation.
Check blades and rotate or
resharpen daily or as required to
keep blades sharp. Refer to owners
manual for instructions. Failure to
do so may cause poor performance,
GDPDJHRUSHUVRQDOLQMXU\DQGZLOO
void the machine warranty.
Lower lever slowly to engage
chipper. Pull lever up to disengage
chipper. Chipper/shredder rotor
will continue to rotate when clutch
is disengaged. Stop engine and
remove spark plug wire before
cleaning debris from discharge
area or servicing this machine. Do
QRWRSHUDWHZLWKRXWGLVFKDUJHVFUHHQLQOHWÀDSVDQGDOOVKLHOGVLQSODFH
Keep hands and feet out of inlet
and discharge openings while
PDFKLQH LV RSHUDWLQJ WR DYRLG VHULRXV SHUVRQDO LQMXU\ 6WRS DQG DOORZ
machine to come to a complete stop before clearing obstructions.
3
5
1
2
YH653000170
YH653000180
YH653000220
YH653000190
Do not insert branches larger than 3 inches in diameter into chipper.
Machine damage may occur. Refer to owners manual for operating
instructions and recommendations.
Keep hands and feet out of inlet and discharge openings while machine
LVRSHUDWLQJWRDYRLGVHULRXVSHUVRQDOLQMXU\6WRSDQGDOORZPDFKLQHWR
come to a complete stop before clearing obstructions.
4
YH653000210
Operation of this equipment may create
VSDUNV WKDW FDQ VWDUW ¿UHV DURXQG GU\
vegetation. A spark arrestor may be
required. The operator should contact
ORFDO¿UHDJHQFLHVIRUODZVRUUHJXODWLRQV
UHODWLQJWR¿UHSUHYHQWLRQUHTXLUHPHQWV
6
YH653000290
Summary of Contents for SC-2013
Page 2: ......
Page 33: ...28 3 INCH CHIPPER SHREDDER ...