P
OWER
P
RUNER
TM
C
IRCLE
S
AW
A
TTACHMENT
O
PERATOR
'
S
M
ANUAL
5
CUTTING
GUIDE
KICK
GUARD
A
B
C
D
E
F
E
F
G
C
B
A
A
SSEMBLY
CIRCLE
SAW
ATTACHMENT
INSTALLATION
Tools Required: Cross Head/Flat Head Screwdriver
Parts Required: Circle Saw Attachment
WARNING
DANGER
The Circle Saw Attachment blade is sharp! Always wear gloves
when handling assembly, otherwise serious personal injury may
result.
1.
Loosen the four (4) screws (A) and remove locator screw (B) on
chain saw attachment.
2.
Slide chain saw attachment off aluminum housing.
(PP-1400, PPFD-2400 Only)
3A. Go to step five (5).
3B. Loosen center clamp knob (D) turning counter clockwise.
4.
Pull aluminum housing (E) out of fiberglass housing 127mm (5 in.)
or 152mm (6 in.), then slide (E) back into fiberglass housing leaving
inner drive shaft (F) exposed. Align and join star shaped drive end
of inner drive shaft (F) with circle saw attachment shaft (G).
(ALL MODELS)
5.
Align ridges on aluminum housing (E) with seams in circle saw
attachment.
6.
Slide together aligning locating hole (B) in circle saw attachment
with locating hole (C) in aluminum housing.
7.
Install and tighten locator screw (B).
8.
Tighten four (4) cutting attachment clamp screws (A).
