S
HAFT
H
EDGE
C
LIPPER
A
TTACHMENT
O
PERATOR
'
S
M
ANUAL
13
SHARPENING
BLADES
Level 1.
Tools Required: Flat File, Small Screwdriver.
Parts required:
Gear box gasket, ECHO
®
LUBE
TM
or
Lithium Based Grease.
NOTE
Blades are very sharp. Wear gloves to protect hands.
1.
Use screwdriver to separate upper and lower cutters equal distance
apart.
2.
File each edge carefully. Follow the original shape of the blade.
IMPORTANT
If a power grinder is used DO NOT allow blade to over heat.
3. Lubricate cutting blades. See "Blade Lubrication Instructions",
page 13 this section.
S
TORAGE
IMPORTANT
Always store and transport shaft hedge clippers in a stable,
horizontal position. Support gear case and cutting blades to
prevent excessive flexing which may cause damage to the cutting
attachment. Always install blade cover when transporting or
storing unit.
1.
Clean and lubricate cutting blades and gear case.
2.
Sharpen cutting blades as required.
3.
Install blade cover onto hedge clipper cutting blades.
4.
Store hedge clipper attachment in a dry, dust free place in a horizon-
tal position, out of the reach of children.
