background image

S

HAFT

 H

EDGE

 C

LIPPER

 A

TTACHMENT

O

PERATOR

'

S

 M

ANUAL

 3

S

AFETY

DECALS

Locate these safety decals on your Power Pruner

TM

 unit.  The complete unit illustration found in the "DESCRIPTION"

section of your Power Pruner

TM

 Operator's Manual, will help you locate them.  Make sure the decals are legible and that

you understand and follow the instructions on them.  If a decal cannot be read, a new one can be ordered from your ECHO
dealer.  See PARTS ORDERING instructions for specific information.

Shaft Coupler

Throughout this manual and on the product itself, you will find safety
alerts and helpful, information messages preceded by symbols or key
words.  The following is an explanation of those symbols and key words
and what they mean to you.

This symbol accompanied by the words  WARNING and
DANGER calls attention to an act or condition that can lead
to serious personal injury to operator and bystanders.

The circle with the slash symbol means whatever is shown
within the circle is prohibited.

IMPORTANT  The enclosed message
provides information necessary for the
protection of the unit.

NOTE  This enclosed message provides tips for
use, care and maintenance of the unit.

M

ANUAL

 S

AFETY

 S

YMBOLS

 

AND

 I

MPORTANT

 I

NFORMATION

IMPORTANT

NOTE

P/N 89016022660

Summary of Contents for Power Pruner 99946400060

















Reviews: