P
OWER
E
DGER
O
PERATOR
'
S
M
ANUAL
5
EQUIPMENT
Before operation a complete check of the unit must be performed;
•
Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed. Do not use edger if any part is missing or
damaged.
•
Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
•
Inspect shield for damage and is securely in place. Replace if shield
is damaged or missing.
•
Check that the cutting attachment is firmly attached and in safe
operating condition.
•
Check that front handle is adjusted for safe, comfortable operation.
See Assembly for proper adjustment.
WARNING DANGER
• Use only ECHO approved attachments. Serious injury may result
from the use of a non approved attachment combination. Read
and comply with all safety instructions listed in this manual and
safety manual.
• ECHO, INC. will not be responsible for the failure of cutting
devices, attachments or accessories which have not been tested
and approved by ECHO.
IMPORTANT
Use of the Power Edger on U.S. Forest land and the states of
California, Oregon and Washington requires installation of optional
Muffler Bracket Kit P/N 10099057730.
ATTACHMENTS
AND
ACCESSORIES