12
1.
OPERATOR'S MANUAL - Read and understand this manual before operation. Keep manual in a safe location for
future reference, i.e., operation, maintenance, storage and specifications.
2.
SAFETY MANUAL - Included in plastic bag (co-pack). Read before operation and keep in a safe place for future
reference to learn proper, safe operating techniques.
3.
ARM REST - Provides arm rest during operation and protects arm from the hot engine.
4.
MUFFLER/SPARK ARRESTOR -The spark arrestor muffler controls the exhaust noise and prevents hot, glowing
particles of carbon from leaving the muffler.
5.
FUEL TANK - Contains fuel and fuel filter.
6.
RECOIL STARTER HANDLE - Pull recoil handle slowly until starter engages, then quickly and firmly. DO NOT let
handle snap back or damage to unit will occur.
7.
FUEL TANK CAP - Cover and seals fuel tank.
8.
PRIMER BULB - Pumping primer bulb before starting engine draws fresh fuel from the fuel tank priming the
carburetor for starting. Pump the bulb 10 times until fuel is visible in clear fuel return line.
9.
AIR CLEANER - Contains replaceable felt element.
10. CHOKE - The choke control is located on the top of the air filter case. Move lever to "COLD START" to close choke
for cold starting. Move lever to "RUN" position to open choke.
11. SPARK PLUG - Provides spark to ignite fuel mixture.
12. GRIP - Rear (right hand) handle.
13. STOP SWITCH - "Slide Switch" mounted on top of the throttle Trigger Housing. Move switch FORWARD to
RUN, BACK to STOP.
14. FRONT HANDLE - The front handle can be repositioned for comfortable operation by loosening the screws and
moving the handle.
15. SHAFT DECAL (See page 4)
16. DEBRIS SHIELD/FLAP - Mounted over the cutting attachment. Helps protect operator by deflecting debris
produced during the edging operation.
17. BLADE - Rotates to provide cutting action.
18. WHEEL - Adjustable up/down, sets depth of blade.
19. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the flexible drive shaft.
20. THROTTLE TRIGGER - Spring loaded to return to idle when released. When accelerating, press trigger gradually
for best operating technique.
