background image

S

ERVICING

 I

NFORMATION

PARTS

/

SERIAL

 

NUMBER

Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for
your ECHO products are available only from an Authorized ECHO
Dealer.  When you do need to buy parts always have the Model
Number and Serial Number of the unit with you.  You can find these
numbers on the engine housing.  For future reference, write them in the
space provided below.

Model No. _____________ SN. ____________

SERVICE

Service of this product during the warranty period must be performed
by an Authorized ECHO Service Dealer.  For the name and address of
the Authorized ECHO Service Dealer nearest you, ask your retailer or
call: 1-800-432-ECHO (3246)  Dealer information is also available on our
Web Site. When presenting your unit for Warranty service/repairs,
proof of purchase is required.

ECHO

 

CONSUMER

 

PRODUCT

 

SUPPORT

If you require assistance or have questions concerning the application,
operation or maintenance of this product you may call the ECHO
Consumer Product Support Department at 1-800-673-1558 from 8:30 am
to 4:30 pm (Central Standard Time) Monday through Friday. Before
calling, please know the model and serial number of your unit to help
your Consumer Product Support Representative.

WARRANTY

 

REGISTRATION

You may register your Echo equipment using the warranty registration
card or register on-line at www.echo-usa.com. Registering provides a
direct link between you and ECHO if we find it necessary to contact
you.

ECHO, INCORPORATED

400 O

AKWOOD

 R

OAD

L

AKE

 Z

URICH

, IL  60047

www.echo-usa.com

DEALER?

Call

1-800-432-ECHO

or

www.echo-usa.com

CONSUMER PRODUCT

SUPPORT

1-800-673-1558

8:30 - 4:30 Mon - Fri C.S.T.

ADDITIONAL

 

OR

 

REPLACEMENT

 

MANUALS

Safety Manuals  in English/Spanish or English/French are available, free of charge, from your ECHO dealer or at
www.echo-usa.com.
Operator's and Parts Manuals are available by:

• Downloading free from www.echo-usa.com
• Purchasing from your Echo Dealer.
• Manuals are available by sending a written request stating the model number and serial number of your Echo unit,

part number of the manual, your name and address, and mail to the address below.

Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.

06001001/06999999

Summary of Contents for PB-260L

























Reviews: