background image

3

*

X7503206101

X750009891

11/08

  WARNING

Read rules for safe operation and instructions carefully. ECHO provides an Instruc-
tion Manual and a Safety  Manual. Both must be read and understood for proper and
safe operation.

Chain Saw

Instruction Manual

MODEL :

CS-341

P

aCking

 l

isT

the ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restric-

tions, guide bar and saw chain installation and other assembly may be necessary.

after opening the carton, check for damage.  immediately notify your retailer or ECHO Dealer of damaged or missing 

parts.  Use the contents list to check for missing parts.

COnTenTs

  1  -  Cs-303t Power Head 

  1  -  guide Bar

 *

1   -  kick guard

  1  -  Hex Head Bolt

  1  -  Hex nut

 *

1  -  saw Chain

  1  -  instruction Manual

  1  -  safety Manual

  1  -  Emission Control Warranty statement

  1  -  Warranty Registration Card

  1  -  assembly tool (s)

  1  -  Echo Power BlendX 

tM

 2-stroke oil sample

the machine may be delivered with guide bar and  

saw chain

 

assembled.

Summary of Contents for Instruction Manual





































Reviews: