9
Locate these safety decals on your
unit. Make sure the decals are legible
and that you understand and follow the
instructions on them. if a decal cannot
be read, a new one can be ordered
from your ECHO dealer.
Decals
e
missiOn
D
aTa
An Emission Control Label
is located on the engine. (This is
an EXAMPLE ONLY, information on label varies by engine
FAMILY).
e
missiOn
C
OnTROl
(
exHausT
&
evaPORaTive
)
EPA 2010 and Later and/or C.A.R.B. TIER III
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
the 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying
the engine emissions output meets applicable emissions regulations, provided that approved mainte-
nance procedures are followed as listed in the Maintenance section of this manual.
the emission control system for the engine is EM (en-
gine modification) and, if the second to last character of
the Engine Family on the Emission Control information
label (sample below) is “C”, “k”, or “t”, the emission
control system is EM and tWC (3-way catalyst). the fuel
tank/fuel line emission control system is EvaP (evapo-
rative emissions). Evaporative emissions for California
models are only applicable to fuel tanks.
GUIDE BAR
CHAIN
PART NO.
PART NO.
12” 12A0CD3745 91PX45CQ
14” 14A0CD3752 91PX52CQ
note:there may be other replacement
components for achieving kickback
protection. For details, please
refer to the chain and bar combi-
nation sheet shown in the instruction
manual.
REPLACEMENT BAR AND CHAIN
