background image

2

I

NTRODUCTION

Welcome to the ECHO family.  This ECHO product was designed and manufactured to provide long life and on-the-job-
dependability.  Read and understand this manual and the SAFETY MANUAL you found in the same package.  You will
find both easy to use and full of helpful operating tips and SAFETY messages.

WARNING          DANGER

Read rules for safe operation and instructions carefully.  ECHO provides an Operator's Manual and a Safety
Manual.  Both must be read and understood for proper and safe operation.

THE

 

OPERATORS

 

MANUAL

 --

contains specifications and information for operation, starting,
stopping, maintenance, storage and assembly specific to this product.

THE

 

SAFETY

 

MANUAL

 --

explains possible hazards involved with the use of Hedge Clippers and
what measures you should take to make their use safer.

T

ABLE

 

OF

 C

ONTENTS

Introduction ........................................................................ 2

-  The Operator's Manual ........................................... 2
-  The Safety manual ................................................... 2

Manual Safety Symbols and Important Information ......... 3
Safety .................................................................................. 3

-  General Description ................................................ 3
-  Decals ...................................................................... 4
-  International Symbols ............................................. 5
-  Equipment ............................................................... 5
-  Fuel .......................................................................... 6
-  Personal Condition and Safety Equipment ............. 6
-  Safe Operation ......................................................... 8
-  Extended Operation/Extreme Conditions .............. 10

Description ....................................................................... 11

-  Contents ................................................................ 11
-  Emission Control ................................................... 11

Specifications .................................................................... 14

-  Models SHC-1700, 2100, 2400, HCA-2400 ........ 14

Assembly .......................................................................... 15

-  Gear Housing Assembly / Drive Shaft .................. 15
-  Power Head / Drive Shaft ...................................... 15
-  Throttle Cable and Ignition Leads ......................... 16

Pre-Operation ................................................................... 17

-  Fuel ........................................................................ 18
-  Equipment Check .................................................. 18
-  Determine Operation Area .................................... 19

Operation .......................................................................... 19

CopyRight© 1999 By Echo, Incorporated
All Rights Reserved.

-  Starting Cold Engine .............................................. 20
-  Starting Warm Engine ............................................ 21
-  Stopping Engine .................................................... 22

Maintenance ..................................................................... 23

-  Skill Levels ............................................................ 23
-  Maintenance Intervals ........................................... 24
-  Air Filter ................................................................ 25
-  Fuel Filter .............................................................. 25
-  Spark Plug ............................................................. 26
-  Cooling System Cleaning ....................................... 26
-  Exhaust System ..................................................... 27
-  Carburetor Adjustment  Emission ......................... 28
-  Carburetor Adjustment  Non Emission ................. 29
-  Lubrication ............................................................ 30
-  Sharpening Blades ................................................. 31

Troubleshooting ................................................................ 32
Storage .............................................................................. 33
Servicing Information ........................................................ 36

-  Parts ...................................................................... 36
-  Service ................................................................... 36
-  ECHO Consumer Product Support ...................... 36
-  Warranty Card ....................................................... 36
-  Additional or Replacement Manuals ..................... 36
-  Manual Ordering Instructions ............................... 36

Specifications, descriptions and illustrative material in this
literature are as accurate as known at the time of publication,
but are subject to change without notice. Illustrations may
include optional equipment and accessories, and may not
include all standard equipment.

Summary of Contents for HCA-2400





































Reviews: